- Home Owner Tips
- Home Buyer
- Home Sellers
- Inspection Guide
- Stop Smoking Moncton
Settling sidewalks and sloped uni-stone patios are common causes of water being directed against your foundation. This can allow water or moisture to penetrate you basement wall and even cause potential settling of your foundation. Always ensure your exterior grade will direct water away from your foundations.
Roof shingles come in many colours and patterns. Most typical shingles will have a life expectancy of 18 to 20 years. The shingles installed on the south side roof will normal show signs of deterioration first due to exposure to sunlight. The granular material of the shingle is there to protect your shingle from UV rays of sun. Although there are many shingles which are advertised as 25 or 30 year shingles, it is unusual to see them last more than a couple of extra years when compared to regular shingles.
Electrical wiring issues is by far the most common problem found in most older homes with a renovated basement. The wiring issues are usually un-supported electrical cables, missing junction boxes and adding circuits to existing breakers in main panel. This is always an indication that the home owner has done the work and a licensed electrician should be called in to inspect and repair all the wiring. I will typically recommend that potential buyers ask for an electrical certificate for home which indicates that all wiring has been inspected and passed by licensed electrician.
Any renovation in your home is required to have a building permit. Part of the building permit process is having plumbing, structure, electrical and insulation inspected by your local building officials or electrical authority. When a renovation is done with out taking out a building permit you run the risk of un-seen problems coming back to haunt you and most likely costing a great deal of money to repair.
Annual maintenance and caulking of exterior joints in your home can prevent needless repairs and save you hundreds of dollars. Caulking seams in window sills and ensuring mortar is still in place on brick window sills can save a lot of repairs for a couple of dollars. Just caulking your asphalt driveway at joint where it meets your garage can prevent separation and sinking of driveway.
When installing pot lights in an attic ensure your lights are designed to be installed in insulation. So many home owners just stick a pot light in there attic without checking. This is a huge waste of energy and is also a big fire risk. The insulation in the attic is usually disturbed and not replaced causing more energy loss and increased heating costs.
Light is basically divided into two categories for the purpose of thermal imaging, visible light and invisible light. There is an almost infinite range of light beyond human range of vision. Light, as described in physics, is an electromagnetic wave that propagates through space at a fixed speed. This wave is further identified by its wave length, frequency and energy. As displayed below the actual wavelengths visible to the human eye is quite small.
Human eyes only see light in the wavelength range from 400 to 750 nm (nanometers). X rays and Gamma rays were initially thought to be particle rays rather than light rays, hence the terms rays. Radio waves are an example of low-energy light waves, and they are often described in terms of their frequency.
Sir William Herschel way back in the 1800’s discovered the presence of the invisible spectrum by using a prism and thermometers. He called his discovery thermometric spectrum, later this came to be known as infrared.
Although un-able to detect the volume of air leakage in a building the infrared device can identify the area of leakage. This is a quick and reliable method for testing the building envelope for leaks or failure of systems. Cold areas are quickly detected by using a infrared camera in the hands of an experienced professional. Prevention and detection are the two main uses of Thermal Imaging.
The main benefits of using an infrared camera are these; investigating air leakage areas prior to enclosing a structure which can save both time and money. Preparing structure for more exhaustive testing if any problems are detected during thermal imaging scans; Finding areas of air movement or moisture penetration which may cause damage or failure to the building products. Potentially protecting you from future expenses and repairs; Any exterior air pathways through the building envelope can also allow moisture to penetrate which can then be protected once identified. Failure to find these deficiencies can lead to rotting or material and mould growth; Professional inspectors who perform Energy Audits use blower doors to create a negative pressure in the home. The infrared camera can then identify all areas of air passage in the home. This can save time and money and ensure all defects in building envelope are identified and corrected.
During home inspections the infrared camera can be used to find hidden water leaks, missing insulation and leaks in window and door areas. The Barrie Home Inspector has been using the Thermal Imaging camera on home inspections for the past eight years and was the first to use this technology in Simcoe County.
Inspecting and cleaning fireplaces and chimneys is essential for the safety and efficiency of your wood burning unit. Remember, some projects are better left to professionals, but with basic tools and common sense, you can get a pretty good idea of the condition of yours.
Start by cleaning your fireplaces firebox. Brush the sides and bottom with a stiff broom or chimney brush. Vacuum out the loosened ashes and if possible remove the andirons.
Some of the items you will want to ensure meet your installation requirements are; ensure you have adequate length of vent pipe, use only rated products for your pellet stove, eliminate use of elbows if possible, ensure vent pipe is all the same size and always use a surge protector for outlet.
Inspecting the chimney involves an interior and exterior inspection of metal or masonry chimney. If climbing a roof is an issue then a professional should be called in. Any chimney must have adequate capacity, the correct height, proper location, proper clearance from combustibles and proper mechanical support to be safe. When an efficient airtight stove is selected and installed with a proper chimney, the proper operation of stove is largely dependent on the skill of the operator.
Inspect the roof, this usually involves climbing a ladder to access the masonry or metal chimney. Remove chimney cap or cover and shine a powerful light into chimney to look for harmful creosote build up or damaged flue tiles.
A vent shall not terminate less than 2.1 m above any public sidewalk, lane or street or right of way. It shall not be within 1.8 m of a mechanical air supply inlet to a building. The vent shall not be within 1 m of a building opening or air inlet or another appliance or within 1 meter of the center line of an exterior gas meter.
If you are buying an older home with a masonry fireplace it is always recommended that you hire a professional chimney sweep to clean chimney prior to having WETT inspection. It is impossible to see cracked tiles or deterioration if chimney has layer of soot and creosote on tiles. Cleaning chimney will remove soot and creosote and allow proper inspection of fireplace chimney. Usually professional chimney sweeps are also WETT Certified.
The Florida building inspectors have jobs that will keep them busy. They need to make sure that the buildings in their location are safe. Inspecting these can consist of companies and homes. Any type of structure that has been developed will certainly need an examination done. Additions on existing structures require looking over additionally.
Florida mold inspection is also an important thing that has to be done. It can be a huge complication in humid areas. Hot and damp locations are the best atmosphere for growing mold. When moisture gets into areas, it is tough to get it out of there if it is very warm.
Mold is not constantly easy to notice so they could need to look carefully in some spots. They also have to ensure that the builders are following the codes. County or state codes can be different in different areas. They alter rather typically also. Regulations will be put on a great deal of things. The required height of the ceiling and crawlspaces is important to understand.
A West Palm Beach home inspection is something that is essential prior to moving in. When something is not to the present standard, they are commonly condemned. Risky structures may even be torn down. This can easily happen for numerous explanations. A building inspector does not typically look at plumbing or electrical work.
Areas of buildings may be a problem too. There could be a rule on where they can easily be positioned. The distance away from a property line is one thing that can have drawbacks. Crawlspaces are required to have a specific heights. Strong floors are essential too.
Buildings have to have assessments in different stages of this process. It is very important that requirements have been met prior to proceeding to the next procedure. This is since there could be things that get covered up too easily. Rental units will also require assessments specifically if someone files a complaint about it.
If something is not developed to the correct standards, the Florida building inspectors will certainly not accept it. They know the means things have to be created and exactly what codes are exceptionally crucial to follow. Looking over a structure is very important before anyone moved into it. People need to have this approval prior to living there.
Inspectorsr-us, LLC specializes in Florida mold inspection. Visit them online for details! (http://www.inspectorsr-us.com)